Nexcom APPC 1240T Manual de usuario Pagina 71

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 116
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 70
Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
55
APPC 1240T/1245T/1540T/1740T/1940T User Manual
Chapter 3: System Setup
2. Locate the SO-DIMM socket on the left side of the chassis as circled
below, where you can install a SO-DIMM module.
3. Insert the module into the socket at an approximately 30 degrees angle.
Apply firm even pressure to each end of the module until it slips into
the socket. The gold-plated connector on the edge of the module will
almost completely disappear inside the socket.
Vista de pagina 70
1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 115 116

Comentarios a estos manuales

Sin comentarios